WAVLINK AX3000 Dual Band WiFi 6 Wireless Internet Router with 5GHz + 2.4GHz, 5 x 1000Mbps Gigabit Ethernet WAN/LAN Ports, 4 x 5dBi Directional Antenna, Router Mode, WPA3, IPV6, TouchLink, OFDMA
This is the third wave link. I've encountered all three at different times.
The first works great - I can set different passwords for 2.4Hz and 5.4Hz, and use it as a hotspot
The second option works great, but I have to use a complex password. This causes a lot of problems because I have several Alexa devices that already have simple passwords set up, so I rely on the former. I use it as an AP
Third, the same thing: 2.4 and 5.4 have a password, and the password must be complex. So, if I don't want to change the password, I have to rely on the first WAVLink. It would be difficult for me to replace them all (light bulbs, smart switches, etc.). As you know, all Alexa devices need to operate at 2.4Hz to configure.
I got this and wanted to try Wisp. I tested it and it works great, it creates additional IP addresses for the device. Instead of 192.168.1.xxx you'll see 192.168.10.xxx, which is an acceptable address when no devices are interacting with each other. He also presented a list of clients in a third list. This way I know which devices are connected to my Wavlink.
If I could break down the 2.4Hz code I would give it 5 stars. The range is great now, previously I was in a corner room and couldn't get a good signal. After placing the device in the corner room, it connected and the speed was very good.
How long is it? I don't know yet. All I know is that the first two Wavlinks I used in AP mode were constantly flashing red, and when I used them in Wisp mode they were solid blue. I don't know why the AP mode is red and the LAN/Bridge connection is showing on the console, but it works fine.
Anyway, this setup is great and easy to set up so far. WISP is as good as the repeater. (By the way, this pattern is a bit misleading. There is no repeating pattern!) You may end up using the Wisp pattern
- ⭐ Ultra-Fast WiFi 6 Speed: Wi-Fi 6 gives you 3x faster speeds, 30% lower power consumption, and 75% lower latency than previous generation Wi-Fi 5. This Gigabit router has 4 Gigabit LAN ports It is suitable for any Internet tariff and allows you to connect wired devices directly.
- ⭐ NEXT-GENERATION DUAL-BAND SPEED: The high-speed AX3000 Wi-Fi 6 wireless router features dual-band signals with 5G transfer rates of 2402Mbps and 2.4G transfer rates of 574Mbps, reducing network congestion, buffering and latency Enabling seamless roaming. Perfect for online gaming, 4K streaming, and fast downloads.
- ⭐Improved WPA3 security for better networks: WPA3, the latest Wi-Fi security protocol, provides new features to improve network security for home networks. It protects all devices connected to your home network, and advanced parental controls let you manage your family's Internet usage.
- ⭐Ultra-Wide & Ultra-Strong Signal Coverage: This Wi-Fi 6 internet router has 4 5dBi omni-directional external antennas and 4 high-performance FEM modules to improve the signal. Combined with beamforming technology, the wireless signal coverage reaches up to 1,500 square feet. Fully optimize signal strength and reception sensitivity to extend a strong and reliable WiFi network throughout your home.
- ⭐More devices, less congestion: The 5G frequency band supports an ultra-high bandwidth of 160MHz, which can double the speed compared to 80MHz, making it easier for many people to play online without worrying about network congestion. Using OFDMA+MU-MIMO technology, up to 120 devices can be connected to the Internet at the same time, greatly improving transmission efficiency.