bluedery cpe220 Wireless Bridge 5.8G PTMP WiFi PTP Point to Point Long Range Wireless Access Point Outdoor CPE Network Extender 2km Transmission Distance with 12dBi Antenna 2 LAN 100Mbps 24V PoE Power Supply
These units are great. I bought it to replace a Ubiquiti device that was damaged during a hail storm. Cheaper and easier to set up. They provide internet to my store, which is about a quarter mile from my house.
The instructions suggest setting the router to 192.168.255.1. Although this works without changing the IP address, I would like to share the device on the boat with devices at home.
Before installation, be sure to check the device according to the instructions. I almost targeted them and checked the online status of the store. there he is! good mark!
Using the Ubiquiti module, I had to program the store's router to act as an access point. Using these modules, I reset the store's router to default settings, connected the receiver's Ethernet cable, and shared all my devices on the network.
I've included pictures showing the signal strength as well as pictures of the house and store. As you can see, the signal is very good even when the modules are far apart and the pins are present.
- The Bluedery CPE220 Mesh Bridge is a long range 5.8G outdoor WiFi bridge with digital display. It is compatible with 802.11a and 802.11n standards, ensuring interoperability. Point-to-point pairing can also be performed over a connection without requiring GUI access. This avoids complicated configuration software, saves a lot of labor and costs, simplifies long-distance wireless coverage and transmission, and makes wireless data collection and monitoring professional.
- Pre-programmed PTMP: This outdoor WiFi extender (also known as remote outdoor WiFi hotspot extender) is easy to install. Simply connect both bridges to the PoE switch via Ethernet cable and the system will work. Wait a minute until both devices are paired and connected to each other. The “Link” LED lights green, indicating that the two bridges are paired. .
- The wireless Ethernet bridge uses a wireless transmission rate of 5.8G/100Mbps, supporting a transmission distance of up to 1.9km (obstruction-free) and providing wired network speeds of up to 100Mbps, suitable for connecting and sharing networks in two or more networks It is a suitable building. And monitor your cameras remotely or access your Wi-Fi network remotely.
- Point-to-Point Long Distance WiFi Extender: Connect two external WiFi extenders to a POE power supply and they will pair automatically without having to connect to a computer for complicated setup. In point-to-point mode, it can be used for long-distance and network video surveillance. Internet Sharing allows access to the Wi-Fi hotspot on the main deck by entering a password, extending forward-angle Wi-Fi access by 60% to 1.2 miles.
- Point to Multipoint Mode: Suitable for CCTV DVR systems to receive video feeds from IP cameras located in different buildings or locations. The master bridge connects the DVR system and the slave bridge connects the IP cameras. This type of bridge is also called "External Wireless Wi-Fi Hotspot Extender". Outdoor WiFi hotspot extenders allow you to easily manage IP cameras from different premises in one system without the need for cabling.