ULNA High Speed Outdoor Wireless Bridge Kit Point-to-Point Gigabit Bridge with 16dBi High Gain Antenna, ULNA 5.8G Remote up to 5km CPE with Ethernet Port, PTP/PTMP, 27dBm, 24V POE Power, 2 Packs
Master and slave portal
The Wireless Ethernet Bridge switches between the master bridge and the slave bridge via the A-B button, where A represents the master bridge and B represents the slave bridge. Note that in point-to-multipoint applications, set one of the bridges as A and the other bridges as B, and then set them to the same channel number to complete the point-to-multipoint connection.
1 gigabit connection
The Gigabit Wi-Fi Bridge has a 100Mbps and a 1000Mbps port, both of which accept 24V PoE power. Gigabit port connection is recommended, CAT 5e -Network cable can be used as data cable and data transmission. . Direct current is not recommended. Tip: Only the PoE port is powered
Elevator control application
Elevator monitoring uses wifi poe bridge to transmit monitoring signal to avoid cable damage and provide stable monitoring image. In addition, the wireless bridge can be quickly and easily set up to be disassembled for reuse, ideal for elevator monitoring
monitoring function
Bridge with monitoring functions. If the remote WiFi bridge connection fails, the corresponding module will automatically detect the network connection, restart and restore it
Easy to install
Use the metal cable ties (included) to attach the high-speed Wi-Fi Bridge to a rack or wall mount. Tips: The two radio bridges should be installed opposite each other if possible, so that the field of view is clear and unobstructed, so that the bridge can achieve the best condition.
- What is CPE 977: The CPE977 Point-to-Point Outdoor Wireless Bridge is a 5.8G Long Range Outdoor WiFi Extender with Digital Tube Display. Supports point-to-point/point-to-multipoint pairing, and the connection can be completed without entering the GUI, avoiding the complicated setup process and saving a lot of time
- Broadband: Build a wide area network, the maximum transmission rate between two bridges is 1200Mbps. The highest network speed that can be obtained is 433 Mbps. Automatic transmit/receive network. WDS network mode, compatible with dual video network, stronger anti-interference ability, better stability
- Transmission distance of up to 5 kilometers: Thanks to the high gain of up to 16 dBi, the directional antenna built into the device can extend the network up to 5 kilometers. Wireless Wifi Bridge can be widely used in daily life. Ideal for extending your network to warehouses, gardens, barns, offices, shops or garages near your home
- 🌐 Plug and Play: It is powered by a 24V Poe adapter (included), which supports connection pairing without entering the GUI. The bridge is pre-configured and only needs to be connected to a PoE power supply to automatically pair the two bridges. Not only can they help extend your home network to a second building, but they can also be used for surveillance
- 🌐5.8G Technology & IP65 Waterproof: The 5.8G wireless bridge uses IEEE 802.11ac single-frequency wireless transmission technology, which has better anti-interference performance, good compatibility and strong resistance to adjacent channel interference, which is better than that of traditional 2.4G CPE. This outdoor WiFi Bridge is IP65 waterproof, dustproof, cold and heat resistant, which is a good choice for outdoor use.