 |
| SODOLA WiFi Bridge |
SODOLA 300Mbps WiFi Bridge, 2.4G CPE Point to Point External 1KM Remote Access, with 12DBi High Gain Antenna, 2 Ports RJ45 LAN Ethernet, 24V PoE Power Supply, IP65 Waterproof Bridge 2 Pack
Some information about SODOLA 300Mbps WiFi Bridge...
The CPE300K is a 300Mbps 802.11b/g/n external CPE standard that supports the 2.4G bandwidth. With the LED digital display, one (several) point can easily be paired without a computer. Supports 24V POE (up to 80m, depending on cable material) and 12V DC 1A, and is designed to transmit video and data over short to medium distances.
Multiple connections when monitoring with WiFi Bridge
- If the cameras are spaced apart, a pair of bridges can be configured for each camera, and the monitoring center connects the AP sites together via switches, then connects to the NVR.
- If the angle between the position of the camera and the monitoring center is less than 60 degrees, one to several points can be considered to reduce the cost of the wireless bridge, provided that the high angle and access requirements are met.
WLAN access speed 300Mbps
The CPE300K is 802.11b/g/n compliant and provides wireless access speeds of up to 300Mbit/s. It operates at 2.4GHz and has a built-in 12dBi dual-polarized antenna.
Wi-Fi transmission range 1 km
The outdoor wireless bridge is a device with very stable long-term performance, and it uses 12dBi high-gain antenna, and the WiFi transmission distance is 1 km under unobstructed conditions.
IP65 waterproof and lightning protection
With waterproof and dustproof cover, built-in lightning protection IC, it can be used in different weather conditions with stable performance.
Ideal for elevator monitoring
- 1. The bridge should be installed face to face, the higher the accuracy, the better the effect;
- 2. The number of Nixie tubes in adjacent elevator shafts should be separated by five digits (eg 0-5-A/1-6-B/2-7-C).
Wall mount - easy to install
One-click configuration steps for outdoor wireless CPE bridge, wall-mounted, just complete the whole system configuration, provide more efficient services for your network.
Support 24V POE
SODOLA Wireless Bridge supports 24V POE (up to 80m, depending on cable material) and DC 12V 1A, and is designed to transmit video and data over short and medium distances.
- [High Speed 300Mbps] The wireless bridge operates in the 2.4GHz frequency band with built-in 8dBi antenna, max 300Mbps crossover, supports 1km wireless transmission.
- 【Easy and Efficient Matching】 No professional or computer needed, just match the same number of digital tubes (within 8 points) with the main and sub floors.
- 【Professional WiFi Bridge】 IP65 dustproof, waterproof and lightning resistance, can be widely used indoors and outdoors, suitable for home, business network, wireless cover cable, security monitoring transmission, very suitable for expanding your wireless network.
- 【Energy Efficiency】 Support IEEE802.3az. If there is no addressable frame, the transceiver goes to sleep and immediately returns to active when a new frame appears. According to the current traffic in the port, it automatically adjusts the power consumption and quickly switches between full speed and low power modes, saving 30% of electricity costs. (Note: Make sure the PoE power supply is 24V)
- 【Beamforming Technology】Beamforming technology makes full use of Wi-Fi bandwidth and expands Wi-Fi range by creating an efficient and targeted Wi-Fi connection. He lives.