 |
| LETS RESIN ELR00180 Fast Resin Curing Machine |
LET'S RESIN ELR00180 Resin Heating Pad Machine Quick Resin Curing Silicone Pad Lightweight Quick Drying Resin Pad Easy To Use Resin Accessories For Epoxy Resin Mold
- 【EXCLUSIVE CUSTOMIZATION IS SAFE】 LET'S RESIN is committed to providing practical tools for craft lovers so that you can save time while enjoying the fun of DIY. That's why we developed our exclusive resin heating pads. Considering the processing conditions of silicone and resin material, we have improved the traditional heating pad and adjusted the temperature settings, which are very suitable for mold processing. In order to be safe and not damage the mold, we designed, tested and modified the mold for a long time, and finally adjusted the maximum temperature to 65°C (149°F).
- 【3-4 Hours Epoxy Resin Curing】When the temperature is set to the highest temperature, the curing time can be reduced from 12 hours to 3-4 hours, reducing the waiting time. You can watch a movie with your family and friends while you wait, and see the beautiful epoxy work after movie. At the same time, resin curing pads are very suitable for small craftsmen, allowing you to process orders faster and improve production efficiency, which is a very good choice.
- 【Suitable for silicone molds】 We know that craftsmen often use heat guns and flashlights to speed up resin curing, or use high-viscosity resins to shorten curing time, which results in excessive air bubbles, cracked silicone molds, and industry defects. Not perfect. So we designed a more perfect solution with fewer air bubbles, faster curing and quick resin curing in a more gentle way without damaging the mould. You can choose LET'S RESIN low viscosity epoxy and then use our heating pads. You can get the perfect craft.
- REUSABLE & KEEP HYGIENE] We specially built a 15.7 x 11.8 inch silicone pad into the resin curing pad kit, and put the silicone pad on the resin curing pad to keep it warm and prevent the epoxy on the heating pad sticks. The silicone pads are extra large and can handle multiple coaster molds or one large surface mold at a time. You can also use the silicone pads alone in other scenarios to keep your desk clean.
- The thickness of the resin for the curing tips should be less than 20mm. If the resin is too thick, it will emit heat, resulting in rapid heating that can damage the mold. ② Place the silicone pad on the resin heating pad when heating. The mold must be fully in contact with the silicone pad to ensure even heating. ④ Run the appliance at an ambient temperature of 25°C (77°F) and set the heating pad to the highest level (65°C/149°F). Shorter processing time. ⑤ Do not leave the heating pad on for a long time when heating for safety reasons.