 |
| MySpool Dual sensors Water and Temperature Alert |
MySpool water temperature alarm with SMS and email notification, dual sensor
MySpool Water and Temperature Alarm is a smart device that can send an alarm when it detects that the water or temperature exceeds an upper or lower limit. SMS and/or email notifications are sent when water is detected, and email notifications are sent when the temperature exceeds a high or low threshold. If the data acquisition mode is configured for temperature data, the value can be sent to the ThingSpeak channel. The device is equipped with an extra-long 6-foot power cord and two upgraded sensors: a 5-foot wired water sensor and a 3-foot wired temperature sensor. High quality moisture sensor, nickel plated surface, corrosion resistant, designed for multiple uses: just wipe and use again. The high-quality waterproof temperature sensor has a temperature range of -55°C to +125°C (-67°F to +257°F), and the accuracy is 0.5°C higher than the recommended range of -10°C to +257°F +85°C.
An alert sent by the MySpool cloud is a message, email, SMS, or both. Alternatively, this device can also send you instant notifications. The water alarm repeats itself every few minutes until the sensor is dry.
Water and temperature alarms are configured for your WiFi use. Setting up a WLAN with a smartphone or laptop takes a few minutes. After setting the water and temperature alerts, you'll need to provide your email address and phone number on the machine's setup page at myspool.com. This page is located in the secure user area of myspool.com along with other user pages showing device status and recent warnings. Settings such as SMS content and opening times are also made in this area. The owner of the MySpool device can access it.
Once installed, an email will be sent to you as long as water is detected. If configured, you will also receive a text message and an instant notification.
This device includes the free central monitoring service MySpool. The service runs on our cloud server. If the water alarm misses the daily scheduled check-in time, the owner of the device will notify the problem via email. There will be follow-up notifications when you go online again.
 |
| MySpool Dual sensors Water and Temperature Alert |
- Use WiFi to send water and temperature alarms without installing apps or hubs. Each device can send alerts to a phone number and up to five email addresses. All or part of the email address can also be used to receive SMS notifications. All services are free.
- Email and SMS notifications are sent when water is detected. Send an email notification when the temperature exceeds the maximum or low. If configured, the temperature data acquisition mode sends data to the ThingSpeak channel. All services are free.
- View device status and recent activity on a dedicated secure web page. This device includes an additional free central monitoring service, MySpool. If your device misses the daily scheduled recording process, you will be notified that there is a problem. When your device reconnects to the Internet, another notification will be sent.
- It is equipped with a 1.8m power cord and two improved sensors: a 1.5m wired water sensor and a 3m wired temperature sensor. High quality moisture sensor, nickel plated surface, corrosion resistant, designed for multiple uses: just wipe and use again. The high-quality waterproof temperature sensor has a temperature range of -55°C to +125°C (-67°F to +257°F), and the accuracy is 0.5°C higher than the recommended range of -10°C to +257°F +85°C.
- The sturdy case can hold up to 300 pounds and is designed for use in dusty and moldy environments. Avoid high repair costs with MySpool Water Alert service wherever flooding, leakage or operating temperatures are likely. All you need is a call or email for world-class support.