 |
| AXOTEN 8 Fans Crypto Ethereum Miner Frame with Barebone Motherboard |
AXOTEN 8 Slot 70mm GPU Mining Machine, with 2000W Power Supply, 8 Fans, Crypto Ethereum Miner Chassis, with Abstract Motherboard for ETH/ZEC, Cryptocurrency Machine System Chassis with SSD/RAM (Without GPU)
index:
1. Please use a GPU smaller than 32cm. The platform is compatible with a single-channel power supply. Please make sure that your power supply is a single channel power supply.
2. If you are using a 2000W power adapter:
After GPU overclocking is enabled, it becomes easy to copy the motherboard, power supply, and GPU. A GPU with a lower power supply rating is recommended. For example, if you use 3090/3080, the 3090's power rating is 290W, and the GPU's overclocking power is about 350W. We recommend 4 GPUs. Just run 3070 and 3060 8 yuan. Please reserve 300-400 watts for other consumption values
3. A mining machine is a unit that needs technology. If you have any technical problem, please contact us, we will be glad to solve your problem.
Excavator problem identification:
We did a quick test before shipping. There is a problem with the drilling options, probably because of the long-distance transportation and heavy express delivery. Do not turn on the GPU immediately after receiving the device. Let's see if the drilling rig works first.
1. Power supply troubleshooting
Check the power supply to see if the fan is spinning.
2. Motherboard troubleshooting
Connect the keyboard to the computer and press the Num Lock key on the keyboard. If the light does not light up, the motherboard may be defective. If the Num Lock indicator is on and you press it again, the Num Lock indicator will turn off, indicating that there is no problem with the motherboard.
More tips
1. System installation
The MSATA SSD we configured with the system will not be installed, you can contact the relevant system official website to download it, there is an installation tutorial.
2. The BIOS can't be called
The HDMI cable is not compatible with the HDMI port. Please replace the HDMI cable.
3. The GPU cannot be recognized
You need to install a GPU driver.
 |
| AXOTEN 8 Fans Crypto Ethereum Miner Frame with Barebone Motherboard |
- [built-in 2000W power supply] Built-in 2000W 10-wire power supply, dBm: 60-68dB approx. It can be used with a voltage of 176 to 264 VAC. (Can't be combined with 60mm 110V household power supply fan. Rotating speed can reach 7000rpm, heat dissipation is good. Energy efficiency is about 90%. Please keep power at 300W
- [Supports 8 GPUs] 8 GPU expansion slots in the miner casing. The mining machine chassis supports 8 GPUs 3060TI/3070/6800/6800XT 6900/6900XT at the same time. However, it is recommended to run only 4 PCs 30803090. Note: GPUs larger than 32 cm cannot be used. It is not recommended to mix different types of GPU.
- [Support 8 fans and one fan controller. Four fans draw air while the other four blow in opposite directions to keep the GPU/motherboard/power supply cool. The fan controller can control the fan speed from 2500 to 4500 rpm.
- [5 USB Ports] Developed specifically for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin, etc. The fan runs quietly and the Miner's Box can be used at home. The shell of the miner has 5 USB ports, which is enough for daily work. Please make sure all interfaces are in good contact to avoid motherboard/GPU overheating.
- A note on miner packaging: Ensure that all interfaces are in good contact to avoid motherboard/GPU/power supply overheating. Scope of delivery: Motherboard, CPU, Power cable, 128GB SSD, 4GB RAM, 2500-4500RPM fan*8, 6-pin to (6+2) pin cable*8pcs, screw package. The mine system is not equipped with a GPU. If you have any questions, feel free to contact us.