 |
| UNILOOK IV8 5 Inch 4 in 1 CCTV Monitor Tester |
UNILOOK 5 Inch 4 in 1 CCTV Monitor Tester, AHD/TVI/CVI/CVIBS Analog Coaxial Video Monitor Tester, 1080P/3MP/4MP/5MP UTP/PTZ Cable Tester Portable VGA DC12V CCTV Camera Tester
IP camera cannot be tested.
This tester does not support network camera testing and can only be used to test analog cameras.
The laboratory cannot take pictures.
When the device is converted to CVI mode, it can only be connected to a CVI camera. If the camera is a different camera with a TVI/AHD signal, you must change the mode according to the TVI/AHD signal so that the connected camera can output images and not the flash.
Does it have to be plugged in to power it or does the battery need to be charged?
This tester has a built-in battery. As long as the battery is fully charged, it can work normally. Otherwise, it means that the battery has run out and needs to be fully charged and charged. Then unplug the plug to use it.
HDMI cannot be recognized.
When using HDMI as the display input, the NVR or DVR can only be connected to the HDMI input signal. If HDMI is a signal output, it must be connected to a monitor or TV.
PTZ control
Supports RS485, compatible with the protocol
PELCO-D/P can control pan/tilt up, down, left and right as well as adjust zoom, focal length and aperture size.
rechargeable
Use a 12V (1A) DC power supply for the test device to power the camera. It is useful for display and testing when no power source is available. Built-in 18650 2600mAh battery, after 3-4 hours of charging, it can work for 11 hours continuously.
Video Signal Test
Video screen tester, 5.0 inch (RGB) x480 high resolution screen, wide viewing angle, wider viewing angle, more intuitive, easy to check camera image quality. Supports PAL / NTSC standard video signal.
5 inch CCTV Tester
Audio Test: Test the audio input of the recording device. Use the audio cable to connect the test device and the recording device.
UTP Cable Test: Check the UTP cable connection status, cable type and cable sequence and read the test box number.
VGA / HDMI Input: Supports VGA / HDMI 1.1 compatible digital input. After connecting VGA/HDMI video, please switch the selector switch to HDMI or VGA mode.
 |
| UNILOOK IV8 5 Inch 4 in 1 CCTV Monitor Tester |
- [Analog Camera Test] 5.0 inch 800 x 480 high-definition viewing angle display, more intuitive and easier to check camera image quality, supports PAL / NTSC standard video signal. Support CVBS + AHD (5MP) + TVI (5MP) + CVI (4MP) camera test, 4-in-1 CCTV test screen. 5.0 inch (RGB) x480 HD screen, wider viewing angle, wider viewing angle, and the camera's image quality is more intuitive and easier to see. Supports PAL / NTSC standard video signal. [Does not support network cameras]
- [HDMI Video Test Screen] Specially developed for the installation and maintenance of analog (CVBS) and HD coaxial cameras with TVI, CVI and AHD on site. It also has many useful functions such as video display, pan/tilt control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data search, cable test, LED lights, etc.
- [PTZ Controller] The video screen tester has built-in Pelco-D / P pan / tilt control protocol, etc. Through the RS485 interface, users can control pan, tilt to pan up and down, zoom, focal length and iris set in one device .
- [CCTV Tester] DC12V 1A Power Output: Use the DC12V (1A) power output of the tester to power the camera. It is useful for display and testing when no power source is available. Rechargeable: Built-in 18650 2600mAh x 2, after 3-4 hours of charging, the working time can be 11 hours.
- Warranty and Professional Technical Support] 30-day money-back guarantee and 1-year warranty, including free parts replacement and lifetime technical support. The Anpviz team offers free lifetime technical support or support via email, phone or video.