 |
| JZTEK 5 inch LCD Screen 4 in 1 CCTV Camera Tester |
4 in 1 CCTV camera tester, JZTEK 5 inch LCD video monitor, suitable for 1080P/3.0 MP/4.0 MP/5.0/8.0 megapixel AHD/TVI/CVI/CVIBS analog surveillance camera, PTZ/UTP/audio test cable with 2600 amplifier mAh Battery, VGA and HDMI connections
JZTEK is a dynamic team that ensures the safety of what is most important to you! We have always done maximum support and maintenance to achieve win-win cooperation and improve the company's competitiveness. With a mission to "make high quality smart lives for more people", we are determined to be a trustworthy global company to become smart technology.
Multifunctional:
Video signal test: video screen test, 800 (RGB) x480 wide angle screen, more intuitive and understandable image quality of the display camera. PAL / NTSC video signal standard.
Analog / AHD / TVI / CVI camera test: AHD 720P / 960P / 1080P / 3MP / 4MP / 5MP / 8MP camera and TVI & CVI camera; CVBS traditional analog camera, eg 960H 1000TVL 1200TVL surveillance camera.
Audio Test: Test the audio input of the recording device.
Network Cable Test: You can test the network cable connection through the UTP CABLE TEST port on the meter.
VGA/HDMI Output: Supports VGA/HDMI, please switch the selector to HDMI or VGA mode. The maximum resolution is 1920 x 1440.
LED lights: It is convenient for motorists to install and maintain the security system at night.
Battery level indicator: This tester has advanced power control and protection circuit, low power consumption and energy saving. After charging for 4-5 hours, it can be used for 12 hours.
 |
| JZTEK 5 inch LCD Screen 4 in 1 CCTV Camera Tester |
- It is specially designed for the on-site installation and maintenance of analog (CVBS) and coaxial HD (HD) cameras and supports 8MP TVI, CVI, AHD and analog cameras. (Does not support network cameras)
- 5.0 inch (RGB) x480 HD screen, wide viewing angle, wider viewing angle, camera quality is more intuitive and easy to understand. Supports PAL / NTSC standard video signal.
- The video screen tester has built-in Pelco D/P PTZ control protocol, etc. Through the RS485 interface, users can control the pan-tilt function of rotating up and down, zooming, focal length and iris in one device. Multi-format video output port visualizer that sends a variety of standard color graphics parts (such as PAL and NTSC)
- Use the DC12V (1A) output of the tester to power the camera. It is useful for display and testing when no power supply is available.
- Rechargeable: two built-in 18650 2600mA batteries, after 3-4 hours of charging, working time can be 12 hours