 |
| Sabrent 1TB Rocket 4 Plus NVMe 4.0 Gen4 Internal SSD |
Sabrent 1 TB Rocket 4 Plus NVMe 4.0 Gen4 PCIe M.2 Solid State Drive (SB-RKT4P-1 TB)
Sabrent 1TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 High Performance (SB-RKT4P-1 TB) delivers all the benefits of flash storage technology via the PCIe Gen4.0 x4 interface.
Based on TLC NAND flash memory, it can play up to 7000MB / s (read) and 5300MB / s (write) when using PCIe Gen4 motherboards. With a PCIe Gen3 motherboard, it has speeds of up to 3400MB / s, consuming much less power than conventional hard drives, and is thus the best all-in-one solution for new systems. Sabrent 1TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 The built-in SSD is equipped with PCIe 4.0 with speeds up to 7000MB / s (read) and 5300MB / s (write) and is thus much faster than PCIe 3.0.
Note: A PCIe Gen4 motherboard is required to take advantage of these speeds. Otherwise, PCIe Gen 3 speeds will go up to 3,500MB / s.
Installing an NVMe PCIe 4.0 SSD directly onto the PCIe Gen4 motherboard requires a heat sink to dissipate the heat at the highest drive speed, avoid throttling, and improve performance.
Internal SSD Sabrent 1 TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 backward-compatible with PCIe 3.0. With PCIe Gen 3 motherboards, users can achieve speeds of up to 3400MB / s.
 |
| Sabrent 1TB Rocket 4 Plus NVMe 4.0 Gen4 Internal SSD |
- NVMe M.2 PCIe Gen4 x4 interface. PCIe 4.0 compliant / NVMe 1.3 compliant
- Supports APST / ASPM / L1.2 power management.
- Supports SMART and TRIM commands. It supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interfaces.
- Advanced wear level settings, block error management, error correction codes and over-saving.
- All Sabrent SSDs come with Sabrent Acronis True Image, which Sabrent Software provides for free to facilitate cloning. For users who need a specific sector size for their existing SSD clone: With the new Sabrent tool, users can reformat their Rocket drive and specify a sector size of 512 bytes or 4 KB as desired.