 |
| Lorex 2.4 GHZ Wireless Range Extender Antenna |
Use the ACCANTD9 2.4GHz Wireless Directional Map Antenna to focus the wireless signal on a specific camera and increase the transmission range (there should be a clear line of sight between the camera and the antenna). . It is highly recommended that a clear line of sight be maintained between the antenna and the wireless camera to ensure maximum signal strength. It is important to note that concrete, trees, or other large objects will significantly reduce signal strength. Direction This antenna is intended for use with one wireless surveillance camera. The range of the signal emitted by this antenna is very narrow, which means that you have to point the antenna directly at the wireless camera. Typical Installation ACCANTD9 signal booster for wireless directional cameras can be installed in many different locations, eg B - on the ceiling, on a fence, on the roof or on the side. Just make sure you can dig safely at the designated site. Ease of installation To install this antenna, you must first install the mounting plate in a location of your choice. Then loosen the rubber cap under the antenna and connect the included antenna extension cable. Then slide the antenna onto the mounting plate and connect the extension cable to the camera's wireless receiver. Combine it with other directional antennas to improve the radio signal.
- 2.4GHz Wireless Range Extender Antenna - Bracket - 2 screws - 2 fixings - 20 inch antenna extension cable - 2 years limited warranty from Lorex
- Open view
- Orientation
- Typical lamps
- Easy to install