 |
| HSGQ Gpon Module C+ Gpon OLT sfp transceiver |
HSGQ Gpon C + Gpon OLT SFP Transceiver Module, 1490nm / 1310nm SMF, up to 20km, compatible with Cisco, Huawei, H3C, HP, ZTE, Optical Fiber, D-Link, Microtik.
GPON OLT SFP 1490nm SMF transceiver is designed to transmit and receive optical data over single-mode fiberglass with a connection length of 20 km.
SFP serial identifier provides access to complex credentials describing transceiver functionality, standard interface, manufacturer, and other information.
The serial interface uses the two-wire CMOS E2PROM serial protocol, which is defined for the ATMEL AT24C01A / 02/04 component group.
After the serial protocol is activated, the host creates a serial clock signal (SCL, Mod Def 1). The rising edge collects data from the unprotected E2PROM parts of the SFP transceiver. The negative edge clock data of the SFP transceiver.
Bidirectional serial data signal (SDA, Mod Def 2) used for serial data transmission. The host uses a combination of SDA and SCL to determine when to start and stop serial protocol activation.
The memory is divided into a series of 8-bit data words that can be individually processed
 |
| HSGQ Gpon Module C+ Gpon OLT sfp transceiver |
- Compatible with SFF-8472 3.3V Digital Mini Diagnostic Monitor (SFP),
- Integrated wavelength WDM filter, ITU-T G.984.2 compliant, works with 1490 Tx / 1310 nm Rx
- DFB 1490nm continuous transmitter, APD-TIA receiver in 1310nm burst mode 1310nm h. The LVTTL transmitter deactivates the fault input and the fault output of the transmitter.
- Fast connection, LVPECL data input / output interface.
- OEM accepted. If you buy one of these, you will receive 1 piece of OUFU optical fiber patch cord for free. SC-SC fiber optic patch cord in single simplex mode.