 |
| ADnet LC WDM Single Fiber Bi-Di Gigabit Media Converter |
ADnet Single Mode LC WDM Bi-Di-Gigabit Media Converter with Single Fiber - Integrated Fiber Module 20km (12.42 miles) - to UTP Cat5e Cat6 10/100/1000 RJ-45 - Automatically detects Gigabit or Fast Ethernet speed - 1 pair
Single Mode Gigabit Single Mode Fiber Optic Media Adapter LC-WDM - Single 20km (12.42miles) Compact Fiber Optic Single Module for UTP Cat5e Cat6 10/100/1000 RJ-45
Expand Gigabit or Fast Ethernet over single-mode optical fiber to 20km and easily reach 1310 / 1550nm and 1550 / 1310nm
Single-mode fiber optic adapter AN-UM-SMC-AS-J + AN-UM-SFP-SM / WDM / 1310 (1550) -20 / D automatically detects 10Mbps or 100Mbps Fast Ethernet or 1000Mbps / s a mega port
Durable, stable and easy to use
- Supports Jumbo Ethernet frames up to a maximum of 9000 bytes (can be configured via DIP switches if needed);
- Support QinQ and VLAN MTU enough to be successful;
- Single-mode 1000Base-LX Single-Mode Fiber Optic Conductor with LC Connector - Distance up to 20 kilometers (12.24 miles) at a wavelength of 1310nm / 1550nm (only one fiber bundle is required between units!)
- One 10/100 / 1000Base-T RJ-45 port auto-sensing function - for all 3 speeds!
- Complies with IEEE 10/100 / 1000Base-T and 1000Base-LX WDM BiDi
- Connect the copper RJ-45 UTP port to Gigabit, Fast Ethernet, or even your old 10 Mbit / s port - everything works!
- If you are using a standalone device (paired with other devices), make sure the wavelength matches the A side and the B side to be used. WDM technology is required to successfully use a single fiber beam for 1310nm / 1550nm and double-sided 1550nm / 1310nm B-side. Please check carefully before installing the unit!
Support for multiple protocols and functions
- LEDs are used for status, power, set / activity, full duplex, and speed
- Standard: IEEE802.3z / 100/1000 / 1000Base-T 1000Base-LX WDM BiDi
- Transport Wavelength -1310nm / 1550nm and 1550nm / 1310nm Optical fiber type: LC Simplex PC / UPC
- Power source: 100-240VAC 50-60Hz
- Dimensions: 70.5mm - 2.77 '' (length) x 94mm - 3.7 '' (width) x 26.5mm - 1.04 '' (height)
- Environment: relative humidity. 5% to 90%
- Operating temperature: 0 to 70 ° C (32-158 ° F)
- Supports LLF Link Loss (can be configured with a toggle switch if needed)
Actually setting up these units is as simple as the three steps shown in the gallery - all default settings can be used in all of your situations. However, if you can toggle the LFF or Jumbo frame on and off, then do it!
Although in most cases you will connect a LAN adapter, wireless router, or regular computer to a UTP port media adapter, this multifunctional switch can still be used with any standard Ethernet port device!
 |
| ADnet LC WDM Single Fiber Bi-Di Gigabit Media Converter |
- Automatically expands to 10 Mbps or 100 Mbps (Fast Ethernet) or 1000 Mbps (Gigabit) Ethernet in Single Fiber Mode extends to 20 kilometers (12.42 miles)
- No more integration problems, just plug an Ethernet cable to any Ethernet port, no matter its speed! UPC fiber link support (blue). Only one fiber required - use the WDM wavelength (1310nm / 1550nm)
- Support for Jumbo Framework and LLF to improve end-to-end TCP performance. Use DIP switches to configure if required
- Plug and Play - Just plug in the optical fiber port and UTP RJ-45 port, you can use it right away
- What you get: A pair of Media Adapters (2 units) and a FREE 1 Meter Cat5e - 39 Inch UTP Connector that came with the kit! - Color may vary depending on stock. + Each device is also equipped with wall earplugs!