 |
| ADnet 10G SFP+ to SFP+ Fiber to Fiber Media Converte |
ADnet 10G SFP + to SFP + Optical Fiber to Transparent 10G OEO 3R-Repeater-2 Standard Open SFP + Universal Bus Slots 10G + or 1GB SFP Fiber Optic Module - Without Transceiver
The 10G SFP + to SFP + optical fiber adapter is a 10Gbps fiber optic device that can be used not only as a fiber optic media converter or optical fiber amplifier for long distance transmission, but also as a complete solution to realize 10GB of optical fiber. The network is strengthened and rebuilt again. His training and schedule.
3R Multimedia Repeater / Repeater / Converter can meet all 10G optical fiber network modes and wavelength conversion needs.
Most importantly, this device not only supports 10G SFP + modules, but also supports MSA SFP 1G (1.25G) transceivers. Just use the DIP button on the front to select the mode!
It is generally used for basic networks (SAN, LAN, MAN, WAN). Support various protocols like SDH / SONET STM-64 / OC-192, 10G Fiber Channel, 10G Ethernet, etc. They can be used in communication rooms, research and development laboratories, data centers, etc. Supports any standard 10G or 1G SFP + module with 850nm optical wavelength shift function, 1310nm / 1550nm / CWDM / DWDM.
product specification
- Jumbo frames support
- Transparent signal transmission and low latency
- Support 8.5Gb / s ~ 11.7Gb / s or 1.25Gb / s (Can be set via DIP switch)
- Supports OEO 3R functions: signal amplification and regeneration, waveform modulation, clock reset
- Easy to install - plug and play
Support for high speed protocols
8.5 Gb Fiber Channel SONET OC-192, SDH STM-64 (9.95 Gb / s) 10 G WAN (10 Gbit / s) 10 G LAN (10.31 Gbit / s) OTN OTU-2 (G. 709) (10.70 Gb / s) S (10 G LAN with 255/237 FEC encryption)) 11.09 Gbps) 10 G Fiber Channel (11.32 Gbps) 10 G POS
Technical parameters
- Transfer rate: 8.5 GB / s - 11.7 GB / s
- Interface Type: SFP + Standard Slot
- Input voltage: DC 12V (power supply included)
- Power consumption: ≤4W
- Working temperature: 0- ~ 60
- Size (length * width * height): 110mm (length) * 100mm (width) * 30mm
 |
| ADnet 10G SFP+ to SFP+ Fiber to Fiber Media Converte |
- The standard 2X SFP + / SFP slots are used as a single media switch and can be used for any type of SFP + unit
- Use it as a double fiber to a single fiber adapter - it provides fiber!
- Use it as a 3R amplifier, modulator, timer repeater and switch in one box!
- When connecting external network devices at 10Gbps or 1Gbps, you can use it to convert and adjust wavelengths from 850nm to 1300 / 1310nm, from 1310nm to 1550nm and even supported DWDM and CDWM wavelengths. Just find the SFP software that works for both locations!
- Wide range of protocols supported: 10 G Ethernet, 10 G WAN (10 Gbit / s), 10 G LAN (10.31 Gbit / s), 8.5 G Fiber Channel, 10 G LAN with 255/237 FEC (11, 09 Gbit / s) Coding!