 |
| Thermaltake Toughpower PF1 850W Power Supply |
Thermaltake Toughpower PF1 850W 80+ unidirectional SMD plate compact ultra-quiet design 120mm hydraulic noiseless smart fanless power supply 10-year warranty PS-TPD-0850FNFAPU-1
Toughpower PF1 Platinum Series has an output of 850W / 750W / 650W and offers 80 Platinum. In addition to the basic functions listed below, the PF1 Platinum Series has two other important functions: the compact size and our new circuit board technology. PF1 covers only 140mm (depth) x 86mm (height) x 150mm (length) and provides enough room to guide the cable. A new SMD card technology is introduced for single use, as all IC chips are placed on one side and heat can only be built on one side, so the entire card can be covered and cooled with a rotating fan and a super quiet 120 mm hydraulic system.
Complete hardware protection
Each PF1 is equipped with overcurrent protection, overvoltage protection, low voltage protection, overcurrent protection, short circuit protection and over temperature protection.
Not a smart fan
The smart zero fan can not guarantee noise at work load less than 20% to reduce audible noise. If the electrical load exceeds 20%, the fan will act immediately.
Decade
You can be assured of Toughpower PF1 support for 10 years and provide you with many update and upgrade services at all times.
 |
| Thermaltake Toughpower PF1 850W Power Supply |
Compact design
The Toughpower PF1 measures 150mm (width) x 86mm (height) x 140mm (depth), making it the most compact power source of the ATX Platinum 80 PLUS in the Toughpower series.
Thermaltake Toughpower PF1 850W Power Supply Specs
- [Over 80 Countries / Region Platinum and Intel C6 / C7] - PF1 Series provides up to 90% efficiency and is optimized for use with all generations of Intel processors to maximize energy savings
- [120mm Ultra Quiet Hydraulic Bearing Fan] - Self-lubricating hydraulic cooling power for PWM engine and almost silent operation
- [SMART ZERO FAN] - Set the fan speed automatically to power consumption for quiet and efficient operation. The fan can only be operated if the workload of the power supply exceeds 30%. You can turn off the switch on the back of the power source to keep the fan running
- [SIDELE SIDE SMD] - The new design of the PCB allows all SMDs to be on top of the PCU, preventing heat from accumulating at the bottom and allowing cold air to flow through the PCU.
- [Compact Design] - Provides better structural compatibility and space for managing cables
- [Japanese capacitors] - 100% high-quality Japanese capacitors provide the highest levels of stability, durability and reliability at 105 ° C (221 ° F)
- [Low ripple and noise less than 30 mV] - Low ripple ensures excellent performance and maintains important performance components, such as: b. Advanced graphics cards can work reliably for a long time.