 |
| Sabrent 4TB Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD |
SSD Sabrent 4 TB SB-RKTQ4-4TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 offers all the benefits of flash memory technology via the PCIe Gen4.0 x4 interface.
Based on QLC NAND flash memory, when using PCIe Gen4 motherboard, performance speed can reach 4900MB / s (read) and 3500MB / s (write).
With PCIe Gen3, motherboard speeds are 3300MB / s (read) and 3300MB / s (write).
Energy consumption is much lower than traditional hard drives and thus the best solution for new systems in the car.
SSD Sabrent 4 TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 was developed with PCIe 4.0. Top speed is 4900MB / s (read) and 3500MB / s (write), which is much faster than PCIe 3.0.
Note: The PCIe Gen4 motherboard is required to use these speeds. Other than that, it will run at PCIe Gen3 speeds of up to 3300MB / s.
If you install NVMe PCIe 4.0 SSD directly on the PCIe Gen4 motherboard, a coolant is required for full drive heat dissipation to avoid thermal throttling and improve performance. performance.
Sabrent 4 TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 internal drive is backward compatible with PCIe 3.0. With the PCIe Gen3 motherboard, users can access speeds of up to 3300MB / s (read) and 3300MB / s (typical).
 |
| Sabrent 4TB Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD |
Careers:
- NVMe M.2 PCIe Gen4 x4 interface.
- Compatible with PCIe 4.0 / NVMe 1.3
- Supports APST / ASPM / L1.2 power management.
- Supports SMART and TRIM commands.
- Support for ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interfaces.
- Corrosion extension, poor block management, error correction code and overload.
- Firmware update.
Sabrent 4TB Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD Specs
- NVMe M.2 PCIe Gen4 x4 interface. Compatible with PCIe 4.0 / NVMe 1.3
- Supports APST / ASPM / L1.2 power management.
- Supports SMART and TRIM commands. Support for ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interfaces.
- Corrosion extension, poor block management, error correction code and overload.
- All Sabrent hard drives come with a free Acronis True Sabrent image that can be used in Sabrent for easy copying. For users who need a specific sector size for their current SSD clone: With the new Sabrent utility, users can reformat the drive and specify the required sector size (512 bytes or 4 KB).