 |
| PrimoChill Enhanced D5 Liquid Cooling 12V Pump Motor |
8541599383 D5 liquid-cooled pump motor equipped with new PWM control chip. With this new console, the D5 now has a PWM duty cycle and rated power and control. The development is similar to that of DDC 3.25. This makes it a very reliable and quiet pump. With PWM control, you can use a PWM processor fan header on the motherboard to automatically run pump speeds based on processor temperature. With this function, the pump can be operated at the desired speed only. If this functionality is available in the BIOS, the RPM feedback-based security function will also be deactivated automatically.
Warning / warning:
The use of caustic and / or abrasive coolers will void the warranty and may cause the pump to malfunction. If you run a dry D5 pump (without liquid), the warranty ends immediately. / RMA will not be replaced in these cases. PrimoChill is not responsible for property damage. Use at your own risk. The pump does not have a casing when leaving the factory, so you can combine any pump caps and pump accessories. As a result, the pump cannot be used as a stand-alone unit.
 |
| PrimoChill Enhanced D5 Liquid Cooling 12V Pump Motor |
Technical index
Nominal Voltage: 12 VDC, Operating Voltage Range: 8 to 24 VDC, Nominal Power (at 12 V): Max 37 W, Nominal Power (at 12 V): 2 A, Motor Type: Brushless, Max Delivery head control microprocessor control: 3.9 m (12, 79 ft) max dump: 1500 l / h (approximately 396 gph) maximum system temperature (60 ° C): 60 ° C (140 ° F) the output varies depending on Housing used
- Super convenient 12V DC
- New PWM controller chip
- PWM function
- Black / black cable
- High printing capacity