 |
| MSI GS66039 Stealth 10SE-039 240Hz Gaming Laptop |
One thing people should know about this laptop is that it was introduced when TDP left the factory. This means that the performance limit is much higher than the Intel specifications. TDP Recommended for Intel i7-10750H is 45W. This should be PL1, but in the end it is appreciated by the laptop manufacturer.
In particular, PL1 is set to 65 W and PL2 to 135 W for all GS66 Stealth models. This is why there is a good thing, which means that you can run your laptop at a higher speed than all cores. By contrast, Razer Blade Advanced 15 hit the 45W PL1 cover at its peak performance last year (and possibly this year too). When it comes to solutions to remove power restrictions, Razer often needs to reload custom BIOS files. This is dangerous because tampering with these files is not covered by the warranty and you can die from your laptop. On the other hand, the GS66 performance limit is increased directly from the factory, so no serious belt is required to be charged. Large!
Now a strong force brings intense heat and enough inventory. Since the TDP height of the PL1 is 65W, the device temperature is very high. If the CPU is running at full capacity, it can dissipate heat (up to 95 ° C) when it's ready to use, but this can be done by reducing low voltage and rewriting and reducing power and frequency of acceleration. You can now find many guides on Reddit. I set the turbo frequency to 50, 49, 48, 45, 42, 38 and the voltage drop at full load temperature (no more than 85-87 ° C) is less than -120 mA. Therefore, once the device is changed, it becomes a monster. To provide standards in Cinebench R20 using these parameters, the highest score you got in Multicore is 3004 and a heart of 484.
This game console is elegant and compact, but it basically hides the game console performance and productivity. GPU also does not require any preset adjustments. Cooling out of the game at some point, the maximum GPU temperature is from 74 to 75 and the fan curve is very quiet.
I use this device for machine learning projects and games, which is a good thing. If you are not afraid to customize the equipment, it is a light monster at an affordable price, I highly recommend it! :) :)
Update: I finally decided to use Kryonaut and used a new thermal pad. My turbo boost frequency is now set to 50, 49, 48, 45, 43, 40. The retraction speed is 110-1 mV. When the continuous beam power is 60W, the temperature at full load exceeds 90 ° C. Additionally, I received single-core cores under these parameters in my new reference test at Cinebench R20 3169 484.
Update 2 (06/30/2020): I recently had other experiments with CPU and GPU with Thermalright Liquid Metal Silver Silver King (which has same performance as Fly connector). You can search for my full review of Reddit, but here I will give a quick overview. Just like the warning, research must be done before refining liquid metals. There are many ways to close the area (foam barrier, 33+ electrical tape or Kapton tape, non-conductive thermal paste to the barrier) so that the risk of laptops does not reduce with regular use, but you need to carefully examine the risks and plan the process carefully before shipping. People on the notebook review forum are very helpful and there are many topics to discuss these issues. Now go back to the summary. I will first discuss the effects of liquid metal regeneration on the CPU and GPU.
CPU: 50 hours 49, 48, 48, 46, 44, 43, -219.7MV, -110.4MV, PL1 65W, PL2 135W, short boost time 56 sec by activating Coolerboost while the reference is on, I received 3375 points Cinebench R20 Multicore, the maximum temperature is 84 ° C, the maximum pull of the CPU data packet is 73 watts and the room temperature is 80 ° F (26.7 ° C). In a cooling chamber with a temperature of 70 degrees Fahrenheit, where the coolant booster is fully operational and the CPU packets consume 73 watts of all cores at a frequency of 4.3 GHz, the temperature should be less than 78 degrees Celsius.
Your energy consumption depends on your arms to strengthen each heart. Remember: however, you can abort the kernel instead of saving it temporarily. The additional step only applies to workloads with AVX instructions. A smaller absolute offset value is used for non-AVX instructions.
Tests in similar conditions (using Coolerboost and the same pressure test) reduce the maximum reference temperature for thermo-liquid refractories by 10 to 12 ° C compared to the fresh taste of Kryonaut. The basic temperature difference also improved significantly from 10 ° C to 5 ° C.
 |
| MSI GS66039 Stealth 10SE-039 240Hz Gaming Laptop |
GPU: Since the shape on the GPU is large and has a power limit of 80 watts, the heat density is not enough to estimate the effect of the liquid metal. Between the Kryonaut bond and the thermalright liquid metal repeat, the Coolerboost temperature is the same. Using the Unigine Heaven standard for 15 minutes of operation while Aida64 is running in two groups at full load conditions of 80W, the sub temperature is cooled at 60-61 ° C.
So if you choose to reuse the liquid metal, you can only work with the processor (compared to the non-conductive thermal paste like Kryonaut, you should get the maximum base temperature increase by 10 + C), just use a good pattern of no heat paste attached to the processing unit.
MSI GS66039 Stealth 10SE-039 240Hz Gaming Laptop Specs
- 15.6 '' 240Hz Wide Angle FHD 3ms NVIDIA GeForce RTX 2060 6G GDDR6
- Core i7-10750H 2.6-5.0 GHz Intel Wi-Fi 6 AX201 (2 axis)
- SSD NVMe 512GB 16GB (16GB 1) DDR4 2666MHz 2 slot, max 64GB memory
- Thunderbolt 3 1 PD Rechargeable USB-C Gen1 1 USB 3 2 Gen2 3 Series Steel via RGB button with anti-ghost button (84 buttons) HD 720p Camera
- Win 10 Dynaudio PRO 2W 2 Ultra Slim Lithium Polymer Speakers 180W with 4 Cores (99 9Wh)
- Operating system: Windows 10 Pro
- System memory type: Ddr4 Sdram