INDMEM 512GB NVMe PCIe SSD 3D TLC NAND |
Important note: Before upgrading to the original SSD, the host MAC must be upgraded to macOS 10.13 High Sierra (or 10.14 Mojave or 10.15 Catalina).
Model: DMPG3N
Interface: PCI Express NVMe Gen3 * 4
Control chip: Silicon movement
Flash Memory Type: 3D TLC NAND flash memory
Product size: 89.2 * 24 * 2mm
MTBF: One million hours
Serial read speed: 2100MB / s (1TB), 1800MB / s (512GB), 1700MB / s (256GB), 1600MB / s (128GB).
Serial write speed: 1800MB / s (1TB), 1400MB / s (512GB), 1200MB / s (256GB), 700MB / s (128GB).
(The read / write speed depends on the performance of the device and may be slower than the above value.)
Data retention:> 20 years at 25 ° C.
Storage temperature: -45 ~ 85 ° C.
Working temperature: -0 ~ 70 ° C.
Power source: 3.3V ± 5%
Operating system version: macOS 10.13+ or higher
Package includes: SSD only (new and unformatted), without screwdriver. Not compatible with containers or other brand adapters.
Why should I upgrade OS version to original SSD before uninstalling?
MacOS versions 10.13 High Sierra, 10.14 Mojave, and 10.15 Catalina include EFI firmware updates on motherboard for PCIe 3.0 NVMe SSD updates.
With MacOS 10.12 Sierra, Mac OS X, or earlier fixed EFI versions, the original PCIe 2.0 AHCI SSD can only work properly.
The firmware version changes with the system update, even if SSD is turned off, it will remain on the motherboard.
INDMEM 512GB NVMe PCIe SSD 3D TLC NAND |
Installation of a time machine
1. Back up your Mac to a USB drive before installing.
2. Replace the new SSD with Mac and connect an alternate USB drive.
3. Start and press the option key during the startup process and select "Backup Disk".
4. Under "macOS Utilities," select "Disk Utility" to remove the new SSD.
5. Under "macOS Utilities", select the option "Restore from Time Machine backup", follow the steps and wait for the installation.
Create a bootable USB installer
1. Download macOS 10.13 or higher to create a bootable installer on a USB drive.
2. Replace the new SSD with a Mac computer.
3. Connect the bootable USB installer to the Mac, start the Mac, and press and hold the option key during the startup process. Select "Install MacOS xxx" and click on it.
4. Select "Disk Utility" in "macOS tools" as the SSD format.
5. Under "macOS Tools", select the option "Reinstall MacOS" and follow the instructions to install macOS on the new SSD.
INDMEM 512GB NVMe PCIe SSD 3D TLC NAND Specs
- The TLC NAND 3D flash memory features a silicon integrated motion controller that provides reliable and excellent performance.
- PCIe NVMe Gen3 * 4 Max Speed: 1800MB / s read, 1400MB / s write. TRIM, NCQ and S.M.A.R.T support MTBF: 1 million hours.
- Before proceeding, the original SSD must be updated to macOS 10.13 or later. If the original SSD 10.12 or earlier Mac OS is installed, the new SSD will not be recognized after the replacement.
- You need SSD format and install macOS 10.13 High Sierra or higher on DMPG3N SSD.
- The official website provides detailed installation instructions and solutions to common problems.