MikroTik CCR1009-7G-1C-1S+ Cloud Core Router
MikroTik CCR1009-7G-1C-1S+

The new updated version of MikroTik CCR1009-7G-1C-1S+ is here. Since the first launch of the CCR1009, we have tried to combine all customer feedback and best practices from the past three years. Important change - no key - the device has only completely independent Ethernet ports. Each port has a direct CPU connection, eliminating previous gigabit 1 chip port restrictions and making full use of the processor switch processor power on these ports. Integrated software interface ports - 1 Gigabit 1 and two device interfaces - SFP carrier and Gigabit Ethernet port so you can use any type of communication. You can also switch between the physical interfaces of the router. When disconnected, the integrated port provides a hardware failure function. SFP supports 100Mbps - this is our first device to support 100BASE-LX / 100BASE-SX / 100BASE-BX fiber and 1.25G standard SFP modules. Faster Speed ​​- Since the port is now directly connected to the CPU, the new CCR1009 can reach a higher speed.

Related Topics :

MikroTik CCR1009-7G-1C-1S+ Technical index
  • MikroTik CCR1009-7G-1C-1S+ In addition to the standard SFP module 1.25G, 100BASE-LX / 100BASE-SX / 100BASE-BX fiberglass units are also supported
  • With SFP and Gigabit Ethernet ports, you can use any type of communication available
  • The device is equipped with an integrated dual power supply unit for repeat (in case one of the power cables fails, the other power cable automatically takes over).
  • The device comes with a 1U holder slot and supports smart main memory cards that can support all certificate authentication functions
  • Equipped with 1U network support, 7 Gigabit Ethernet, one integrated port (SFP or Gigabit Ethernet), 1 SFP + with fixed frame, 9 GHz CPU, 1.2 GHz, RAM, LCD panel, dual power supply, chip slot card , RouterOS L6









Previous Post Next Post